44 Royalty-Free Audio Tracks for "Tighten"

String tightens then whips.

Tightening a bone corset. First without breath, then with a gasping sound.

Rope tightening venice italy.

Rope tightening venice water bus parking. Mp3.

A ratchet strap being tightened.

Handbrake of a car - tighten and loosen.

Made by sliding my hand across a drawstring bag.

Clicking sound of snowboard boot being tightened in a mount with a strap.

A rough and raw recording of a mechanic doing some tightening work on a tire.

This is a very interesting sound to make. Luckely i knew exactly how to make this sound. I used leather jacket. I twisted the jacket back and forth moving it in front of the mic. The sound is almost identical to what i wanted. This was recorded at the open window institute sound booth in centurion, south africa.

Sound of ziptie being quickly tightened.

The sound of someone gripping a chair tightly.

Cable ties being tightened.

Bass sound distorted, with a distand echo. More tightened.

Recording of snowboard straps clicking and being tightened.

Bass-synth processed to a more tightened version. Crazy bass!.

A ratchet sound good for mechanical sounds. Recorded in 2012 with a shure sm58 in my friend's kitchen.

Large extension cable used to simulate a leather strap being tightened.

Recording of snowboard straps clicking and being tightened.

Recording of snowboard straps clicking and being tightened.

Leg vise being tightened slowly. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Buckling airplane seatbelt. Ntg-2, tascam-dr60d.

Recording of snowboard straps clicking and being tightened.

Recording of snowboard straps clicking and being tightened.

Recording of snowboard straps clicking and being tightened.

Steel handcuff recorded with rode ntg2, closing ratchet with slight pause then close a bit more.

This is recorded using 2 oktava mk012 mics,. Enjoy.

Sound of using a wrench tool/ allen key to tighten bolts.

Socket set, socked fitted to ratchet then ratcheted up.

Squeaking noise made by tightening screws on an ikea wood table being assembled on the floor. Recorded with a smartphone.

Sounds like a clock, but it's someone pumping this metal elver thing to tighten something.

Sound fx for a machinery seal door. With air effects as the seal tightens.

Sound made by dropping a hoody knotted and tightened into a ball being dropped on a couch, carpet floor and a pillow.

A mix of sounds to create a hanging with drop, rope tightening, scream and swinging. Recorded on sharp mini disc with sony ecm-907 mic.

This is the sound of the plastic adjuster at the back of a bicycle helmet being tightened and then released - a plastic-y ratchet sound. Recorded with stereo nt1a mics in a soundbooth. No effects.

A chordless drill being run a various speeds and being tightened and loosened. Recording equipment: akg c214 / focusrite saffire pro 24.

Vlc ratchet tightened four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

This is sound was designed to start out loosely spaced, in conjunction with other sounds, and tighten up to build tension before a drop. I use it in offset pattern as a "call response". I had to keep it under 2 seconds to remain viable at the precipice. Soloed, sequenced, or combined to create a new sound. Have fun with no string attached!. Key: a♭ minoralt key: 1abpm 107.

Thanks to my buddy, randy, this police radio chatter sample is now made possible. I cleaned up all addressed and names, hopefuly, from the 16 minute or thereabouts chatter, tightened it down somee, and made it possile. This is best used in audio productions, andis free to use as you see fit. I do not require credit.

Originally contributed by freesound user juskiddink, this series of two blasts on a finnish birch bark horn has been shortened and tightened for use as a ring tone. It's a long, organic and haunting two-tone call echoing in the forest night; a clear alternative to the mechanical and tightly musical ringtones out there, and one i like a lot. Edited to wrap nicely for a continuing repeat.

A sound of a tightening wrench (a bike repair kit) being spun around to produce its distinct ratchet like sounds. Foley fun: put to 25% of its rate and you get convincing metallic gear sounds, apply a tiny bit of reverb, maybe layer it with some screeching sounds from other users (or me, your choice) or a slow gate shutter to get a nice mechanical door opening sample.

I created the beat using ableton. I recorded the guitar part on my fender strat, useing warping ableton to tighten up my playing. I used a peavey mic (away from comp will check model when i get home) going to a fast track ultra audio driver. Please credit me if you use it.

In front of my desk in my room is a wood paneled wall with a cubbie. It's about a foot wide, 10 inches from top to bottom and maybe 7 inches deep. I'm just guessing. Around this cubbie is a border of wood. In the bottom right corner under the border i have jammed one end of an elastic string that used to have glitter on it. It's from a christmas box of chocolates my uncle sent me last year. I stand in front of this cubbie whose bottom is at chin height, (i'm only 5ft1in) so my arms are above my head as i pull this string across the cubbie up and to the left to the border on the top which acts as my only fret. The string is a few inches longer than the cubbie is wide, but when i pull it it gets longer so my hand is 3/4 along it's length as i pull back and forth across the border to tighten and loosen the string. No matter how hard i pull it never pops loose from it's mooring. This time the mic is sitting in the cubby so i get a much clearer and louder sound. When i stretch the string across the top it has a fairly long sustain, so i can play 4 notes on a single pluck.

In front of my desk in my room is a wood paneled wall with a cubbie. It's about a foot wide, 10 inches from top to bottom and maybe 7 inches deep. I'm just guessing. Around this cubbie is a border of wood. In the bottom right corner under the border i have jammed one end of an elastic string that used to have glitter on it. It's from a christmas box of chocolates my uncle sent me last year. I stand in front of this cubbie whose bottom is at chin height, (i'm only 5ft1in) so my arms are above my head as i pull this string across the cubbie to the border on the left which acts as my only fret. The string is a few inches longer than the cubbie is wide, but when i pull it it gets longer so my hand is 3/4 along it's length as i pull back and forth across the border to tighten and loosen the string. No matter how hard i pull it never pops loose from it's mooring. The recording starts with me standing up from my chair. In the first part until 01:54 i am playing the string at maybe 30° from horizontal. It has a buzzy quality that reminds me of an african folk instrument i can't remember the name of. From 01:33 to 01:54 i'm trying to imitate a korean folk vibrato kind of thing. In the second part until 02:29 i am playing 45 to 60° from horizontal and it sounds like a full-bodied string bass with no buzz. In the last part beginning at 02:34 i am playing about 75° from horizontal across the top border of the cubbie on the left so it sounds buzzy and african again, and i'm just going crazy goofing around with a crazy bluesy rock sort of rhythm. There didn't seem to be any homemade 1-stringed wall-cubbie basses on this site so here is mine, have fun. I don't play it if mom is home because the living room is on the other side of the wall and she can't hear tv. Also my neighbor can probably hear it in the next apartment lol. Recorded with microsoft lifecam 3000.