469 Royalty-Free Audio Tracks for "Resonance"

Large hall of an old building that became a library and a museum, in marble that resonates a lot. The people, voices and movement, seem distant. Would also be appropriate for airports, train stations, places of passage. Streo recording with h5.

This second sound is a recorded sound of a bike chain, i modified it using some effects :1-normalize2-wahwah effect with-frequency = 3. 3 hz-start phase = 0-depth = 70%-resonance = 2. 5-wah frequency shift = 30%3-melt closingthe final sound gives an impression of a sound under water.

It is what the title says "modified doepfer a-124 vcf5 wasp filter"listen and you will understand ;-)i the middle of the sound/beat i turn up resonance. I have connected cv2 to the bass pitch signal. Funny effect.

While i was playing around with some "extreme settings" on my technosaurus micron, this rhythmic structure came out. The bleeps are from the resonance of the 12 pole filter, driven by the lfo. Recorded directly into audacity through my macbook internal soundcard. Info on this synthesizer: http://www. Vintagesynth. Com/misc/microcon. Php.

While i was playing around with some "extreme settings" on my technosaurus micron, this rhythmic structure came out. The bleeps are from the resonance of the 12 pole filter, driven by the lfo. Recorded directly into audacity through my macbook internal soundcard. Info on this synthesizer: http://www. Vintagesynth. Com/misc/microcon. Php.

Creategenerate sine wave tone, frequency = 340. 00 hz, amplitude = 0. 80, 30 secondsduplicatedapplied effect wahwah…frequency = 4. 0 hz, start phase = 280 deg, depht = 92%resonance = 6. 9 frequency offset = 30%applied effect : tremolodeleted 30 seconds at t = 0. 0generate sine wave tone, frequency = 330. 00 hz, amplitude = 1. 00,30 secondsapplied effect wahwah… frequency = 1. 5 hz, start phase = 359 deg, depht = 33%, resonance = 6. 9, frequency offset = 30%duplicatedtime shifted tracks/clips right 0. 61 secondsmixed and rendered 2 tracks into one new mono trackapplied effect : tremoloapllied effect : apple : audistortionapplied effect : valve saturationapplied effect sliding time scale/pitch shiftduplicatedgenerate sine wave tone, frequency = 120. 00 hz, amplitude = 1. 00, 22. 000000 secondsdeleted 44. 91 seconds at t = 0. 00mixed and rendered 2 tracks into one new mono trackapplied effect: compressornormalize to 0 db.

White noise through s&h sampled at audio rate using neóni. Quantised sequenced in mimeophon and dpo using 0-ctrl. 1/2 signal through erbe-verb the other through mimeophon. 10 markers set. Rendered at 48khz 32bit for morphagene in reaper. Enjoy!.

Raindrops hitting my bedroom window. Recorded in carson, ca. Used a zoom h6 with the xy attachment and windscreen on, pressed mics against window for a contact recording. This was done in order to capture full resonance of the glass. (geotag is not at my actual address, but a nearby location. ).

Fiddling with a disposable plastic comb, mainly by plucking and stroking the edge and side of its teeth with my fingers. I also play around with the comb in my mouth a bit, using the resonance of my vocal cavity to modify the sound, and also running the teeth of the comb over my own teeth.

Fiddling with a disposable plastic comb, mainly by plucking and stroking the edge and side of its teeth with my fingers. I also play around with the comb in my mouth a bit, using the resonance of my vocal cavity to modify the sound, and also running the teeth of the comb over my own teeth.

Took a violin bow to a chinese guzheng and the results were pretty great. Good for ambience, drones and creepy stuff. Recorded with blue spark and blue bluebird condenser mics through a scarlett 6i6 interface. Uncut with a small glue compressor to minimize spikes.

I'm trying to create a sound that resembles captain america's shield from the marvel movies. I took a recording of a metal garbage can ringing and brought it into iris 2. I cut the attack from the envelope and added light amplitude sine wave modulation. I also set a short decay. I also layered a clean sine wave underneath the recording sample in order to give the recording more umph and body when it resonates. This is the base of captain america's shield. Layer this with metal impacts and sub sonic stings and you're all set. Please post a link if you use this file. I'm excited to see what you can do with this!. Text me if you want to have fun and talk gear. I love hearing what people are up to!702-860-9869.

Basically i connected one lfo to the polivoks in. Now when i think of it. Wonder if that added something…. And how much. And to cv1 i connected a square wave and to cv2 a wide frequency sine wave. Resonance at max. Think i have to reanalyse this patch later… i’ll be back!.

Here's the sound when danny phantom is going ghost! i'm told it also resembles the sound effect in the yu yu hakasho opening. The sound is just two white noise whooshes on top of each other, one descending in pitch and one with a little more resonance ascending in pitch. Made in hybrid3.

Loopable lead sound from my technosaurus microcon, obtained by multi tracking 3 slightly detuned and lightly off phase saw waves. 12 pole filter, fully opened, no resonance. Played in gate-trigger mode (no adsr whatsoever). Recorded directly into audacity through my macbook internal soundcard. Info on this synthesizer: http://www. Vintagesynth. Com/misc/microcon. Php.

Creation date: 13 - 06 - 2017. Details of this sound:. Subject of recording:- object : small waterfall- material : water. Place of capture:- type : in forest- resonance : very low- distance from source : 2 m / 2 yard. Recorder:- recorder : tascam dr-40 v2- type of microphone used : condenser microphone- wind shield : rycote dr-40mwj. Recording parameters:- capture type : stereo- resolution : 16bit 44khz- input level: 60. Software used:none.

Two-pole circuit breaker recorded held in my hand, also pressed against a wooden board for more resonance. And some rattling mechanical handling noises at the end. Useful as electrical switch click. 96 khz, 32-bit float. Tlm-103 mic straight into pro tools. The only processing is a mild gate. At least it has a good noise floor.

Contact mic recording of a large folding clothes hanger/dryer. Tapped on the stems for hanging clothes to create some weird drone/percussion hits. Recorded with a lom geofon contact microphone into a sony pcm-a10 handheld recorder.

Recording of water running down the bathtub drain after the bathorganic rhythms are emerging out of one another as the water is whirling down and getting less in volume as the whirl changes in speed and volume and resonance with the metal tub and the drain tuberecorded with a stereo microphone on minidisc the microphone left dangling and turning over the water to create random panning.

Hitting a half-full insulated klean kanteen water bottle with various objects. First short set with my fingertip, second set with the side of my varnished tin starbucks coffee mug and the third set with the side of a standard 3/8" plastic sharpie marker. According to my synth, this is extremely close to, if not spot-on with a d-natural (294 hz).

While i was playing around with some "extreme settings" on my technosaurus micron, this rhythmic structure came out. The bleeps are from the resonance of the 12 pole filter, driven by the lfo. Here, the lfo is driving also the oscillator pitch, resulting in a rhythm shift. Recorded directly into audacity through my macbook internal soundcard. Info on this synthesizer: http://www. Vintagesynth. Com/misc/microcon. Php.

While i was playing around with some "extreme settings" on my technosaurus micron, this rhythmic structure came out. The bleeps are from the resonance of the 12 pole filter, driven by the lfo. Here, the lfo is driving also the oscillator pitch, resulting in a rhythm shift. Recorded directly into audacity through my macbook internal soundcard. Info on this synthesizer: http://www. Vintagesynth. Com/misc/microcon. Php.

A short clip of a small volume of liquid being transferred from one container to another with a nice ringing quality to it. I believe this is tea being poured into a mug, but i don't remember specifically. Recorded with a zoom h4n and edited in audacity. Apologies for the high noise floor on this clip, i had my preamp set for something else!.

Breathing industrial game: different breathing with some distortion. Sampled into ableton using distortions like trash2, compression using psp compressor2. Recorded using a sm58 mic into ua-25ex. Crazy sounds is what i do. Check out my songs on soundcloud. Com/spankmyfilth :d. .

Alien alarm: 110 bpm c2 note, strange sounding alarm. Absynth 5 sampled into ableton, compression using psp compressor2 and psp warmer. Random presets, and very little other effects used, mostly so this sample can be re-sampled. Crazy sounds. Check out my songs on soundcloud :d.

Skewer slam is a combination of my knife sharpening sounds and metallic impacts/wobblers (some not yet uploaded here!) to create a sesnsation of something big, intense and lethal coming towards whoever it either find offensive or is ambulatory. As a personal note; the distortion you hear is not because of clipping in the initial recording but because of the higher acoutistic resonance and limiters applied which will not sound like this when downloaded.

Muffled muddy balim sound created with interplay of 2 o-ctrl (thanks walker!) through strega and o-coast. Echophon, mimeophon and morphagene heavily involved along with the haible tau phaser. X-pan plays the stereo. Rendered in reaper @48khz 32 bit fp with 14 markers for all you morphagene fans out there. Enjoy the mud!.

Glass beer bottle blow sounding like the background "whoo" effect in the movies alien and blade runner. Mono. Old school spot effect. Helmholtz resonance using a partially-filled (for pitch tuning) glass beer bottle. The resulting tone was sampled, bandpass filtered, pitch bent and laid over a copy of the original sample. Reverb added post-effect to push the sound back and smooth out some nasty quantizing artefacts caused by the pitch bender.

Doepfer a-118 white noise through an a-108 vcf8 using the band-pass out. Audio level: 4. 5emphasis/resonance: 9frequency: around 12khz. Recorded using a rme babyface and cubase 6. 5. I tried to cut seemless loops. It's always nice to hear what projects you use these sounds for. Let me know. ;-).

This is a recording of two gretsch catalina maple floor toms, one 14 inches in diameter, one 16 inches. I replaced the original tom feet with pearl air suspension feet, which gave a huge improvement in tone, resonance and sustain. Recorded with a sony ecm-ds70p stereo recording microphone into an iriver h340 mp3 player. Normalized in sony sound forge.

This is taken from (and an answer to) mxsmanic's "trip on métro line 9 in paris, france", at 2:20 exactly: metro on rails through the tunnel, which resonance creates this sound (very familiar to me as i live here). Interesting to notice that the sound's frequency stays around 483hz, which was (in the ancient solfeggio frequency science attributed to pythagoras) the frequency of "opening consciousness".

Creation date: 14 - 60 - 2017. Details of this sound:. Subject of recording:- object : upright piano- material : wood and strings- peculiarity : quite high. Place of capture:- type : inside- resonance : none- distance from source : above. Recorder:- recorder : tascam dr-40 v2- type of microphone used : condenser microphone- wind shield : none. Recording parameters:- capture type : mono- resolution : 16bit 44,1khz. Software used:- fl studio 11. Fx added:- edison : remove noise, reverse spectrum and suppress reverb.

A marimba note being struck while thrown in to the air. Can't remember the mic that was used but it was a condensor mic. This was recorded in my room so unfortunately the signal to ambient noise ratio isn't great. The sound can be used for free (though it would be great to hear about what you do with it). It may not be re-distributed as it is, or as part of a compiled sound library.

Tabla is percussion instrument with two drums 'daya' and 'baya'. Only the 'daya' drum is usually tuned. For checking the tuning the 'na' bol is played. Recorded using samson-go portable condenser mike at home. Placing the mike too close to tabla was clipping the sound and if placed away, it was not picking the extended resonance. Hence the mike was moved closer after attack, hence the apparent increase in amplitude and some doppler effect is seen.

Creation date: 16 - 06 - 2017. Details of this sound:. Subject of recording:- object : bedside lamp switch- material : plastic- peculiarity : button + sizzles of bulb. Place of capture:- type : inside- resonance : none- distance from source : 20 cm / 1 lien. Recorder:- recorder : tascam dr-40 v2- type of microphone used : condenser microphone- wind shield : none. Recording parameters:- capture type : mono- resolution : 16bit and 44,1khz. Software used:- fl studio 11. Fx added:- edison : to amplify the signal and to suppress parasites. _______.

This is only a recording of me playing a djembe, recorded with a pair of nt1-a mics, but after messing around with some of logic's amp and resonator effects i ended up with this. The 6/8 groove reminded me of the doctor-who theme, and the interval displacement of a minor 6th i thought sounded pretty cool. You don't have to credit me, but if you use my sound i'd love to hear what you come up with!.

Blip random: c2 note, random short blip sounds from synplant. Sampled into ableton as atonal as possible with a bit of effects, compression using psp compressor2 and psp warmer. Random seeds in synplant, and very little other effects used. Crazy sounds is what i do. Check out my songs on soundcloud :d.

This is a series of sounds created for spitfire audio's make music day 2020 #spitfiremmd2020 it is a plastic drum, a springy pot rack and a big metal chip bin. There are both harmonic and enharmonic sounds here. The bin as a wonderful resonance and a lot of low end. This is a mono recording through a sennheiser 416 and an rme pre-amp. Enjoy!.

Kind of a continuation on the "world in chains" theme. Here the ghouls are getting ready to seep out through the cracks in the pavement and pay the world up above a ghoulish visit. Oh and don't forget fungus the bogeyman, my favourite raymond briggs character. Try guessing what modules i used. (hint: all but 3 are from makenoise).

Some generative wildfire sfx made with sunvox. The crackling sounds were made by taking some highpassed white noise, ring modulating it with some more white noise, and then using a noise gate to usilate the loudest 'crackles'. The rumbling was created using lowpassed white noise, and the wind was made by bandpassing white noise with a high resonance and randomly sliding the filter frequency. Everything was sent into a reverb and a stereo expander.

An impulse response, made with vital softsynth, simulating the responce of a bunch of strings tuned to notes of bohlen—pierce scale. Specifically, a middle ground between 13 equal divisions of a tritave (interval 3/1) and the just-intonation bohlen—pierce scale. (for no particular reason. ). Convolving with this might add some xen flavor to your sounds, even if you play in standard tuning 12edo. I tried it with surge xt’s hammered dulcimer patch (i love hammered dulcimer!) and heard some additional shimmering.

Blip trails: c2 note, random blip sounds with fast attacks and short trails using massive. Sampled into ableton with just a touch of reverb to help the trail smooth out, compression using psp compressor2 and psp warmer. Random parameters in massive, and very little other effects used. Crazy sounds is what i do. Check out my songs on soundcloud/spankmyfilth :d.

Some kind of tardis-esque machinery humming away, ready to project the adventurer into outer space. Would be useful as a sound effect for a video involving strange futuristic machinery. No effects have been put on it to aid this. This was created with my eurorack, the main component is a waldorf wavetable oscillator nw-1 module, put through an a-127 triple voltage controlled resonance filter and a a-188-2 tapped bdd delay. The filter and oscillator are modulated in sync by an a-145 lfo.

This is a repost of beerbottlewhoo. Ogg. It's the same sound except that this one is in wav format. Glass beer bottle blow sounding like the background "whoo" effect in the movies alien and blade runner. Mono. Old school spot effect. Helmholtz resonance using a partially-filled (for pitch tuning) glass beer bottle. The resulting tone was sampled, bandpass filtered, pitch bent and laid over a copy of the original sample. Reverb added post-effect to push the sound back and smooth out some nasty quantizing artefacts caused by the pitch bender.

This is a remix of oceas 8th loop at 130bpm, the samples in this pack were made mostly by running the original loop through a custom plugin i made with synthedit. The general idea of the plugin is to seperate the incoming audio into 8 seperate channels using high-resonance bandpass filters, then run each of the 8 channels through its own special effect including reverb, delay, harmonic generation, ring modulation, modulation of the original signal by the harmonic generation signal out, and another reverb.

This is a sound of vintage soviet transistor organ junost 75. I have sampled one tone per octave in its 5-octave range, which is sufficient to re-create the original sound (tested on ensoniq asr-10, korg tr6 and casio ctk-900). But if you use only the middle sample, you can still simply create a great combo organ sound. This sample has ben recorded while all 4 registers were switched on. For succesful re-creation i recommend to slightly decrease filter cut-off, to add some resonance and fast vibrato. Enjoy!.

. . On the third plant of an apartment building in a calm, suburbian district. There is only a little traffic resonating through one half opened window of the staircase. Once in a while you can here the neighbour's kids laughing or yelling. Almoste unhearable there may be an adult's voice or someone speaking on a television and some unspecific sounds coming from one of the flats. Plus one or two bird's singing can be heard from the trees nearby. It's juli 2021.

Acid bass: 110 bpm c2 note, not your typical saw/square basslines. High sweeping filters in parallel sampled in ableton using massive, compression using psp compressor2 and psp warmer. Random presets, and very little other effects used, mostly so this sample can be re-sampled. 110 bpm so it can be pitched up which is usually better then having to pitch samples down. Check out my songs on soundcloud :d.

Some sounds of blowing across the top of a glass bottle. Specifically a 33cl cider bottle. :-). Captured using a rode nt5 small-diaphragm condenser microphone and a zoom h5 recorder. Basic editing in ocenaudio, also applied some slight de-reverberation. I intend to record a proper version later on, including different articulations at various pitches. But that may take a while. In the meanwhile these samples might be useful for some sound design. One more thing. It's always nice to hear back from you. What projects did you use these sounds for?please let me know. ;-).

Used in a mix where someone gets hit in the head with a wooden stick. A very versatile sound. There's a bit of low-end resonance in the end of the hits. This sound is licensed under creative commons 0, meaning you can use it in any work, for free, forever! however, i request that if you do use it in your project, you leave a comment below sharing what you used it for. You can use the sound regardless, but i would love to see what people use it for. Thanks, and happy mixing!.