1,385 Royalty-Free Audio Tracks for "Tools"

Here are some recordings of some of my basic woodwork tools. I'll try and get better recordings in the future but i share a workshop and it is rarely quiet enough to get good recordings. All recordings are me working on a piece of 25mm thick walnut timber. Listening back has made me realise that all of these tools need sharpening!! :). The recordings are as follows:. 00:00 - 00:26stanley block plane fine shaving the edge of the timber. 00:28 - 01:33stanley 5m retractable tape measure, metal blade and plastic casing. Tape being wound out and drawn back in. 01:36 - 03:30milwaukee m12 battery drill. Trigger being pressed, chuck opening and closing and bits being changed. Drilling into timber. Driving screws into the timber and removing them again. 03:32 - 05:14lie nielsen crosscut tenon saw cutting across the grain of the timber. 05:17 - endgeneral purpose wood saw 'ripping' along the grain of the timber. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

Quick usage of a cordless power drill. Recorded on a zoom h5.

Baustellenlärm, kurze intervalle mit presslufhammerähnlichem gerät. Noise live from a (privat) construction area with an working tool similar as an jackhammer, i think. Single sound without much other sounds of a construction area. Snippet with short intervalls. Taken with samsung galaxy s5. Germany,25. 10. 19.

A few sounds of using a normal metal screw-clamp. The sound has been close mic-ed. Recording equipment: akg c214 / focusrite saffire pro 24.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

So i have an old switchblade. I recorded a few variations of opening and closing the knife. At the end, i also recorded swishing of the knife.

Various power tools.

Skil-brand handheld jigsaw. Some stops & starts, then an extended drone. Recorded indoors using a zoom h4n with built-in mics.

A chordless drill being run a various speeds and being tightened and loosened. Recording equipment: akg c214 / focusrite saffire pro 24.

Upper harmonics created by a jackhammer operated in wellington city, new zealand (jackhammer sounds filtered out). Jackhammer was clearing debris in the cbd after an earthquake. Recorded with a tascam dr-44wl.

Sounds of weapons and tools layered to suggest several people gathering tools or weapons off a rack, or some kind of industrial activity.

Scissor like metal tool. Click. Tascam dr-100.

A few tool box drawers being opened.

Just open my tool case.

Scissor like metal tool. Click. Tascam dr-100.

Extending a telescopic tool, slower this time. A pair of sennheiser me64s into a tascam dr40.

Moving some tools and boards.

Socket set, socked fitted to ratchet then ratcheted up.

Rake tool on my garden.

Rake tool on my garden.

Small electric drill being used,.

Recorded with zoom h5 & ntg3.

I made this for theofficialelectr3x who kindly asked for it.

A vibrating saw or sanding tool.

Recorded with zoom h5 & ntg3.

Recorded with zoom h5 & ntg3.

Just a random guitar riff i made. In the style of tool.

Air compressor tool to removes weld flux, rust, scale, paint, cement and other residues from surfaces for surface preparation applications.

Operating a sliding metal clamp.

A very powerful vibration tool is recorded here.

Old machine tool cone, rec with zoom h4n.

Dj tool to use as a winding back a record.

Dropping metal tools on concrete. Recorded in a garage using tascam im2 stereo mic & ipad2.

Digging into a tool box. Recorded with a zoom h2n.

Someone foley of a person working at a desk with some small tools.

Searching a toolbox. Plastic box with metallic and plastic tools. Mono recording, 48khz/24. Mic: neumann km 185 supercardioid, zoom f8 recorder.

Someone hammering a nail in the wood in an apartment.

This is a sample that comes from my foley and production tools samplepack.

Recording of the sound of a build-in microwave oven in a (dutch) kitchen in 2013. Recorded with htdz shotgun microphone, irig pre xlr adapter on samsung s4 smartphone.

Sound of a drawer being open from a red toolbox.

Hot air drier run and stopped.

Tools traffic subway platform start to leave china.

8 second recording of a flex shaft tool rev. Recorded with a h6 handheld recorder.

Hedgeclippers placed upon on a small wobbly wooden table. Anyone can use. Share and share alike.

This sound was taken from a construction area close to building 16. Wave, 44. 1khz, 24bit, stereorecording device: zoom h2 with xy-capsulelow-cut: yes (80hz)normalized to -1dbfslocation: leuphana university lüneburg, building 16. Lat: 53. 228286162730626lon: 10. 403215885162354. Date: 2013-11-19, 13:20h. Recorded by: julia rehfeldt, wiebke stein and laura medrowedited by: laura medrow. This recording was created in the framework of the seminar "soundscape leuphana (ws13/14)".

This is a sound i came up with while messing around in audacity it sounds like a blow torch to me but what do you think let me know in the comments and like always if you make over 1 million dollars off you aaa game / movie than you share the wealth lol but i would like to know what you use it for that is it credit would be nice but not necessary.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Chop saw started then slicing through plywood.

Striking a galvanized steel wildlife tunnel with a metal tire tool repeatedly, producing a ringing sound.

Digging into the ground with a shovel. Loose dirt and a metal shovel.