55 Royalty-Free Audio Tracks for "Metal Clip"

A springy metal chip clip opening and closing at different speeds.

The sound of a metal butterfly screw on my stative. Recorded with pc microphone and lots of background noise. -- sample processed with noise reduction in audacity.

The sound of a metal butterfly screw on my stative. Recorded with pc microphone and lots of background noise. -- raw sound.

Some paper clips moved by a finger.

Short clip/sample of metal rings being dropped in a pile. Jingling.

Foolin around with pieces of metal in a trainyard hall in sweden.

Rollin with bycicle in city, microphone fix at the rear wheel and at the end touch the metal with pcm d100.

Handling and using a vintage binoculars with their leather strap and metal clips dangling. Recorded with audio-technica boom mic on tascam dr60dm2.

Recoding of a small hand held metal and plastic clicker for training dogs. Recorded in stereo with an edirol r44 recorder and a rode nt4 microphone.

Recording of a small hand held metal and plastic clicker for dog training. Recorded mono with edirol r44 recorder and shure sm81 microphone.

Backing track i wrote,recorded, played all instruments.

High-quality recording of handling two handguns.

Paper being cut with metal scissors at different levels of intensity.

Roland CR-78, Rhumba beat with metallic effect. Note on playing this audio clip This audio clip is an en:Ogg Vorbis file. For a list of compatible media players, see the article at [1].

Clipping nails: you can hear the subtle click of a nail-clipper cutting down nails. A few options are available in track and they vary in duration, tempo and amplitude. Recorded with the zoom h6, rode ntg in a sound studio. Can be used in any make-over montage.

Studio recordings of handling a small metal mechanical device for foley purposes. Originally used to foley handling sounds of a tattoo machine, but could also be used for guns, surgical instruments etc. Recorded with an at-4047/sv large-diaphragm condenser mic. In this clip, i am handling the device, producing diverse clinks and ratcheting sounds.

The sound of a dog leash and correction collar. Moved and dropped the collar, clicked the clip of the leash to simulate the sound of climbing gear. Recorded on razer kraken kitty and cleaned up in audacity.

Modified this great sound by thewestwindhttps://freesound. Org/people/thewestwind/sounds/149012/. To make it sound like an express being clipped into a blot while climbing, you can also use only the second click again for the rope clip. Sounds pretty realistic to me, hope you enjoy!.

A trigger based on my basic sjc snare's attack.

This is the sound of snapping a large metal clamp opening and closing. Recorded with a sound devices mixpre3ll and a matched set of audio technica at943 microphones.

This short sound clip is from the metalworking shop next door here in tijuana. It has some sections where they hammer twice in a row with two different pitches, it's quite melodic and unique. There is some very light ambient traffic and music noise.

Recorded a short clip of rain on the roof of my van. Recorded with an h4n.

A fairly harsh and slightly clipped sample of foley artistry to create a heavy "shockwaving" impact. You may notice that this is the layering sound of skewer slam.

Banging noises and metallic clanging captured at tanner hospital in ely mn. Captured with an olympus audio recorder using a lapel condensor microphone clipped to my collar.

The sound of a sword being withdrawn (with some difficulty) from a sheath, and then accidentally being dropped and hitting the ground. Also sounds like metal scraping metal. Created by rubbing a scissors against a cheese knife. Recorded on an iphone for an adr/foley project (project on this clip: http://www. Youtube. Com/watch?v=7at4fugxtmg#t=8 ).

All music is original and my creation. Me playing on my gibson les paul electric guitar. Donate doge: dbsbgyyumwjhd9xk8bthqqqaykhzlibdhp.

Bullets being loaded into a pistol. Recorded with the tascam dr-40 built-in microphones, processed in pro tools 10, bounced to a 48khz 24bit wav file.

Some coins spilling out onto a table. Raw audio recorded with a sennheizer e935. Might be useful for money exchange clips in games or videos.

Spinning 3 inch diameter x 1/8 inch thick aluminum disc on a granite plate. Recorded in stereo with an edirol r44 recorder and rode nt4 microphone.

Spinning a 3 inch diameter x 1/8 inch thick aluminum disc on a linoleum table. Recorded in mono with an edirol r44 recorder and a shure sm81 microphone.

Spinning 3 inch diameter x 1/8 inch thick aluminum disc on a ceramic plate. Recorded in mono with an edirol r44 recorder and a shure sm81 microphone.

Spinning 3 inch diameter x 1/8 inch thick aluminum disc on a glass table. Recorded in mono with an edirol r44 recorder and a shure sm81 microphone.

Spinning a 3 inch diameter x 1/8 inch thick aluminum disc on a steel plate. Recorded in stereo with an edirol r44 recorder and rode nt4 microphone.

The name says it all mostly. This sample is @ 135 bpm, with a delay tail to overlap to the next loop. Please use and enjoy.

A 7:00 clip of the construction around a new bridge that includes a barge mounted pile driver striking steel piles into the water. Summer 2013construction audio as crews work to replace the johnson st. Bridge in victoria, bc, canada.

Kenco 10 ton punch press, forming and crimping a 3/4" diameter x 1. 5" long steel cylindrical part on to a rubber hose. Recorded in mono with an edirol r44 recorder and a shure sm81 microphone.

A recording of a noise of a polish train running, slowing down with the specific metalic sqeaky sound, stopping, accelarating and then running slowly. At the end of the clip there is a motorcycle passing by no the road parallel to the train tracks. Recording was made using zoom h4n on 48khz and 24bit settings.

Two custom contact mics clipped to a moka pot whislt heated on a gas hob. The sound of the metal expanding can be clearly heard and the coffee flow sound is audible towards the end of the recording. Tascam dr-22wl, custom stereo contact microphones20-05-10_091458_dr-22wl_moka_coffee_contact. Wav.

Kenco 20 ton punch press, punching. 13” x. 024” steel coil, 2 ø. 062” holes and cut to 3’ l. Recorded at a manufacturing factory in stereo with an edirol r44 recorder and rode nt4 microphone.

Skewer slam is a combination of my knife sharpening sounds and metallic impacts/wobblers (some not yet uploaded here!) to create a sesnsation of something big, intense and lethal coming towards whoever it either find offensive or is ambulatory. As a personal note; the distortion you hear is not because of clipping in the initial recording but because of the higher acoutistic resonance and limiters applied which will not sound like this when downloaded.

Looking through a golf bag: in this sound you can hear the clubs hitting each other making a metal sound. Recorded using the zoomh4n and the rode ntg1 condenser shotgun microphone. I lowered the volume at certain parts to prevent it clipping. The clubs in the golf bag is a driver, a wedge, a putter and a 6 iron.

Recorded on my zoom h4n 44100 hz stereo. This is a short clip of my 11 year old son playing basketball in the driveway at our house. There is ambient road noise. It starts off with a swish, then some dribbling then another swish. This is a rubber basketball bouncing on asphalt with a metal rim, nylon net and wooden backboard.

Most beautyful sound we have ever shot,an explosion of a test tube containing magnesium metal and copper ii oxide,it made a lot of damage to my bench but it was worth it !check out the clip here -> link <-- the chemical workshop.

A climbing (screw)karabiner clicking shut (4 of 5). Also kinda sounds like a handgun being loaded. Recorded with my new zoom h4n recorder. Cc0, so no hassle with giving credit.

An atmospheric and mostly mellow walking recording in lower east side, nyc. There are many metal access doors to the streetside businesses that are built into the sidewalk and that is the banging that you hear as people walk over them. Clips also has a few snips in it.

I was playing around with my sampler fx today and decided to rig up my electric guitar. I use a fender american special stratocaster, hooked up to an akai s2000 sampler with on-board fx - distortion and guitar metal applied in real time, the signal then sent through to amplitube fx rack on my computer with vintage crunch setting. This is a strum of the lower e open. I recorded a number of stabs and thought this clip might come in useful.

A loop of rain. Unlike my other version of this clip, which has a low-cut filter to remove the rumble, this version is unfiltered, and is included here for anyone who wants a raw-er version to customize themselves. Drops falling on metal can be heard. ---2 primo em172 capsules -> zoom h1.

Why does everything i upload sound like people screaming and/or chainsaws!?. Sound source is a contact mic producing feedback into various fx. The main fx used for the clip are a sirkut electronics gnarler, boss metal zone, dod grunge, and finally, a danelectro french fries auto wah. Recorded direct-to-sound card as usual. This is a sample taken from a longer piece.

Sample is a clip from another song i just recorded. Created with effects pedals feeding back into each other. Effects used: behringer micro-mixer (used here as a "clean boost/volume effect), sirkut electronics gnarler, danelectro eq, boss xtortion, and boss metal zone, with various other fx sprinkled throughout. This is another "sounds kind of like screaming" sample.

The raw version of this sample was made by hitting my knuckle on a metal sculpture of an aircraft. De-clipped and de-noised just slightly using izotope rx. Verb, eq and comp in logic pro 8 + plugins. Recorded using the spectrumview iphone app. Sample rate = 48ksample size = 24 bit.