2,017 Royalty-Free Audio Tracks for "Low"

A recording of a high school class. Students were working on a sound effects project on computers, but generally allowed to talk as they worked. This is maybe 18 students, with the mic about 10 feet away from the nearest student, mic towards one side of the room, pointed towards the middle. We also have ac on, and an av cart that has a fan on, plus a wall clock, some of which you may not be able to hear over the students. Mic was the zoom h1 set to record a wav file, record level manual, low pass filter engaged, with the quality settings at the highest values. It was then put through audacity to amplify it to the highest allowable levels without distorting, and spit out as a wav.

Note: the high-pitched squeaks are artifacts from freesound's preview and aren't present in the actual recording. 10 minutes of a thunderstorm, recorded september 7th, 2019 from my apartment window in seattle. This is the raw recording straight from my zoom h5. Levels were kept low to minimize the chance of clipping. A few thunder sounds were still too loud, but luckily the h5 has a backup function that recorded an identical track 12 db quieter. I've uploaded that as well, so you can splice the two together to taste. Eventually i'll release a processed version with the two combined, plus compression and eq, but i wanted to upload the source material in case you'd prefer to diy it.

For a podcast project i needed some coffee related sounds so i recorded our techni-vorm moccamaster, filter coffee machine as it brewed a full pot. Our version has a metallic thermos jug rather than the standard glass jug. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

I found this fairly small low area, in deep woods, with about 5 inches of water in it. I wouldn't really say it is a pond because it will probably be dry in a month or so after the spring rains. (i think ecologists would call this small body of water an "ephemeral" pond). These spring peepers were putting on quite a chorus as the sun was going down. You'll hear a different sounding frog - or peeper - several times in: at 9 seconds in, 13 seconds in and 15 seconds in. When i first heard it, it sounded like a creaky door! hope you find this fascinating and enjoyable as well. Would make a great soundtrack for a swampy piece. Recorded using my trusty rode ntg-2 going into a zoom h4n recorder.

This is my attempt to emulate the sound of the harmony 64 chimes that can be heard on some ice cream trucks. I used a single note from a low-quality recording from a demo of the chimes for the base synth then cleaned up the audio using audacity and set the starting pitch to "c". (in particular, i used the first note of the "can-can" chime from http://www. Microminiatures. Com/tunes. Html). I then composed a short variation of a well-known song (bicycle built for two in this case). This loop can be used in games or other projects as long as you put a link to this sound's page in the game description. I hope you enjoy and any feedback is welcome!.

This is a quick fire sound i made using qubodup's "swing 25" public domain/cc0 upload on this site. It's a bamboo stick swinging, which i layered and toyed with to get the results here. For those curious, here are the steps. * i took the file into reaper, and slowed the file's playback rate to 31% of the original. * i then duplicated the file three times, for a total of 4 tracks. * track 1 (lowish gas-burner sound):- reverb (drum-room impulse response, a medium-sounding reverb with a slight deadness to it. In free impulse loader reverberate le, stretched impulse to 150% and set attack time to 0. 218s). - eq (-8db bandpass near 200hz, rising back to 0 by the 1k mark. Low-pass applied at 5. 8khz). * track 2 (lowest of sounds, like a bassy gas-burner):- chorus effect. That's it. (specifically acon digital multiply, a free plugin, set to the "romantic" preset). * track 3 (not as low as track 2, but closer to track 2 than 1)- reverb (a large hall impulse response. No adjustments, ie. No increased attack or stretching like for track 1. ). -chorus doubler (free plugin duet, preset: "basic doubler. " same effect as if i had doubled the track and pitched one up 6 cents. ). - chorus (free plugin acon digital multiply, preset: "romantic. "). * track 4 (most flame-thrower, whooshy of tracks. )- reverb (impulse response says "hall medium," but it's a thick, even echo from start to finish. Makes the sound go from its default "whoosh" to a flamethrower noise. - chorus doubler (duet again, preset: basic doubler). - chorus (acon digital multiply, preset: "romantic. "). Master bus:. - compressor (tdr kotelnikov mastering compressor, the free successor to the tdr feedback compressor ii. Preset: punchy. Thresh: -20. 9, soft knee: -1. 5, ratio: 2:0:1, attack: 7. 0 ms, release peak: 70 ms, release rms: 165 ms, makeup: 1. 5 db, output: 2. 0 db. That's it.

A heartbeat sound i created. Fairly consistent through most of it, and then speeds up into heart-attack mode about 30 seconds from the end. To make it, i took a kick-drum sample and a snare-drum sample, and made a pattern of kick-snare, kick-snare, kick-snare, over and over. I then eq'd them to be less distinct and drum-like, added tape saturation to increase the low-end thumping, a small chorus effect and some compression to get rid of the drums' attack. . . Basically just over-processed the hell out of it. Then i used a plugin called wok m-st to get a fake hard-panned stereo effect. My goal was to make it sound like your heartbeat sounds in your ears when you've been running too fast for too long. I think it sounds cool.

As a homage to freesound. Org for being a member for over 7 years under the name "djeuphoria", i present the freesound community with some unique sounds i've created recently using loads of different plugins and synthesizers that i've been acquiring over the years that has slowly turned into a massive collection. So with that being said i'm going to be periodically adding sounds to my "dream sample pack" so you can all hear the sounds i've been creating under my new nickname "dream", thank you all for the downloads, its awesome to see how terrible my sound quality was and how much i've improved from that, enjoy these awesome synth sounds i've engineered, cheers. -dreamp. S, most of the melodic sounds are recorded in the key of c for convenience and all foley sounds are recorded with a zoom h4 at 44khz.

Production step :this sound is from a sound recording of a key hiting an iron bar. I take just one sound from my reccording and copy/paste in a new track. I amplify the sound and do a low pass filter. I copy paste my track and create another one just above. I move this new track for create a gap between the two tracks. On the second track i supress some of the beat for create a rythm. On the second track i change the pitch, for making a sound more high-pitched. Description :this sound looks like the ring of a bell tower. The rythm change every two bars who makes him unique and not settled. This sound is, for me, a reference of the track begining of dark techno music. Typologie de schaeffer :. Masse: nodaltimbre harmonique: eclatantgrain: résonnanceallure: mécaniquedynamique: rondeprofil mélodique: ascendant puis descendantprofil de masse: dilatation.

A complete trip on métro (subway) line 9 of the paris subway system, from the alma-marceau station to the havre-caumartin station. Starts with descent into the métro station and ends climbing up the steps back out at the destination. One train is allowed to pass, at about the 1-minute mark, as we wait on the platform, and an announcement giving the times for the next trains can be heard. The ride on the following train begins at around the 2-minute mark. There are two loud sounds between about 9:10 and 9:20 and some loud low-frequency wind noise at around 10:40 (as we leave the métro station and return outside), so beware. Recording with zoom h4n, originally 96 khz/24 bits, uploaded as mp3 320 kbps because the wav was so big (almost 500 mb).

This sample consists of noise recorded via a hondo strat electric guitar resp. The guitar's neck pickup. Throughout the sample there is a low hum. In the beginning, a mobile phone was moved in front of the pickup. The noise might have been created by the clock of the phone's cpu or the backlight of the phone. After that, one crt display is switched on resulting in a buzz. Later on, a second crt display is switched on, again resulting in a buzz followed by additional noise in higher frequencies. Then, a neon light is switched on, creating even more noise. Towards the end, again the mobile phone. . . The guitar was connected to a scott&noble ht25r amplifier which was recorded with a t. Bone sc450 condenser and a behringer ddx3216 digital console directly into ardour.

An unintended recording of me and a passerby walking through very thick and wet mud on the walthamstow marshes. I was out testing new gear and couldn't remove the mics from my rucksack strap to avoid picking up the rustle of my clothing or my occasional heavy breathing. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

A rather lengthy sound byte that i heavily edited to the point of being unrecognizable. It sustains a flat note with varying bass levels causing an unnerving effect or the listener or player. I had designed this track for a roleplay plot involving a cursed train station, the plot came out kinda rough and it fell through midway. . . But, the audio track i made came out good enough to post here like my first sound involving my transformers oc!. It's free to use as long as you credit me, and it can be used in a wide variety of fields that is deemed appropriate. From suspense to horror, or even background noise in a lighter field; it can be altered and edited as needed due to it's broad and simple design. I made the volume low to prevent any extreme bass causing ear bleeds. Hope you enjoy! <3.

A short journey on london overground train from dalston to highbury and islington passing through canonbury. Recording includes ticket barrier noises, doors opening and closing and general announcements. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is some processing to this recording to ‘normalize’ the levels and light eq-ing. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

(recorder: zoomh4npro 2018)(microphones: binaural roland cs-10em in-ear monitors). As these are recorded using binaural in-ear mics, i purposefully attempt not to turn my head to keep the sound clean and coming from the same direction. Of course, if you don't want binaural audio you can always easily convert to mono. This is a recording of me approaching a soda machine in my apartment complex, swiping my credit card in the new, handy-dandy credit card slot, and dispensing a coke zero (in case you really needed to know). Safe for all production as it is voice free. I kept the peaks very low to maintain a natural sound. Enjoy!. Christopher c. Courter.

This is the second version without the mechanical bolt. Maybe can be used for bolt action rifles. Made this is ableton live, it is multilayered with the top end of a 9mm and the low/mid range of an ak47. Another carbine sound is faded in after the transients to give more sustain. Two reverbs fade in and out creating a smooth transition and blend. A little white noise is added for subtle sheen and air. All the layers were grouped together into a single band compressor and ran through serum fx distortion and then into a krush distortion plugin for added fatness. A blending reverb was used to glue the sounds into the same space and ran into a final transient designer which is adding a little more snap and punch and clipping the excess transients off. Enjoy.

A hot summer afternoon in the swedish forest/mountains. Recorded with zoom h5 (xy) outside the cabin i rented. Recording mostly consists of birds and general life from people moving/talking as they arrive to their cabins with family. Its intended to represent a peaceful vibe with some human presence. I decided to not remove much movement/actions from the people such post because i felt it might suck out the soul of the recording. In post: in pro tools i removed some low rumble, and and trimmed the highs just a little bit. Added a "pro expander" to lower some noise, both generated by the h5 and the location. Ps. I have a version with 2 dpa 4060 in a ab stereo fashion of the same recording, abit noisy but its on my profile if you want to listen. Hope you like it.

A walk through ridley road market in dalston, east london. Lots of people chatting and music playing. As with many markets in london there are lots of languages being spoken. You can hear traders calling out what they're selling. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is some processing to this recording to ‘normalize’ the levels and light eq-ing. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

A piece of music i made in garageband for something called victors crypt. The tune starts out with a bassline, pretty slow. But when the beats come in it's a pretty fast paced piece. Kept things simple and just added some low pitched strings and, voices and some reverbed sounds. It ends in a kind of mysterious and spooky way. Suited for anything dark, spooky, eerie, suspence, thrilling for instance. Think it would work great to a game, youtube-channel or episode, movie or whatever you feel like. Feel free to use it as long as you give me the credit for it/write me as composer. And subscribe to and watch my channel :). Be cool watch and subscribe to victors crypt:https://www. Youtube. Com/channel/uca8o46_wrqzehsdzuwfq3rq. Throw horns, dance & hail satan!.

A crescendo demo of the registers Violin, Viola and Horn, with modulation and sustain. You will hear random akkords with extreme rhytmic crescendo demo. The crescendo effect is monophonic, i. e. the keys have always to be released and pressed down again in order to get the crescendo effect. The crescendo only influences the registers Violin and Viola, not Trumpet/Horn and Contrabass and Cello. Note: Horn is the low pass filtered version of the register Trumpet, not an additional register. Trumpet sounds much brighter. If the button Horn is pressed, you may release the button Trumpet, without any change in sound. Horn means French horn. The Trumpet or Horn register offer the effects of the brass section in an orchestra. This is the famous and well known sound of the Arp/Solina String Ensemble! Data of instrument: Series 76 (Manufacturing year) No. 0131202 Manufactured by B. V. Eminent - Bodegraven - Holland

(recorder: zoomh4npro 2018)(microphones: binaural roland cs-10em in-ear monitors). As these are recorded using binaural in-ear mics, i purposefully don't turn my head to keep the sound clean and coming from the same direction. Let me set the scene for this audio because i am a nerd. . . Burbank, california. A large apartment/condominium complex with an open courtyard and a beautiful swimming pool and hot tub. I'm done in the hot tub and walking up 3 flights of stairs to my apartment. Squeak. . . Squeak. . . Squeak. . . Sure to sound either intimidating or goofy. Depends on your show!. I kept the peaks very low to maintain a natural sound. Recorded on 11/20/2018 in burbank, ca. Enjoy!. Christopher c. Courter.

One of my favorite spots to hike in illinois has this quite long, and beautiful and rock-lined beautiful creek. Now, even though this creek is in heavy forest, which often leads to very low water levels during the summer, this creek is spring fed so it always has a beautiful ribbon of pure water running 12 months out of the year. I've spent many minutes and countless hours beside this living, breathing water-course pondering the beauty of nature, and reflecting back on my childhood. A childhood filled with much love and many creek adventures. This was recorded on march 8 2021, at a time in the midwest woods when the mayapples are popping up-- lime green umbrellas spotting the forest floor. Recorded with sound device mixpe-6 and a sennheiser me66. Enjoy the stream of re-birth in illinois.

Recorded a generator for my air conditioner with a zoom h6 with the lows cut.

The same as my other fire whoosh sound, but i used a hi-pass eq at the 50hz mark to take out some of the "mud. ". --. This is a quick fire sound i made using qubodup's "swing 25" public domain/cc0 upload on this site. It's a bamboo stick swinging, which i layered and toyed with to get the results here. For those curious, here are the steps. * i took the file into reaper, and slowed the file's playback rate to 31% of the original. * i then duplicated the file three times, for a total of 4 tracks. * track 1 (lowish gas-burner sound):- reverb (drum-room impulse response, a medium-sounding reverb with a slight deadness to it. In free impulse loader reverberate le, stretched impulse to 150% and set attack time to 0. 218s). - eq (-8db bandpass near 200hz, rising back to 0 by the 1k mark. Low-pass applied at 5. 8khz). * track 2 (lowest of sounds, like a bassy gas-burner):- chorus effect. That's it. (specifically acon digital multiply, a free plugin, set to the "romantic" preset). * track 3 (not as low as track 2, but closer to track 2 than 1)- reverb (a large hall impulse response. No adjustments, ie. No increased attack or stretching like for track 1. ). -chorus doubler (free plugin duet, preset: "basic doubler. " same effect as if i had doubled the track and pitched one up 6 cents. ). - chorus (free plugin acon digital multiply, preset: "romantic. "). * track 4 (most flame-thrower, whooshy of tracks. )- reverb (impulse response says "hall medium," but it's a thick, even echo from start to finish. Makes the sound go from its default "whoosh" to a flamethrower noise. - chorus doubler (duet again, preset: basic doubler). - chorus (acon digital multiply, preset: "romantic. "). Master bus:. - compressor (tdr kotelnikov mastering compressor, the free successor to the tdr feedback compressor ii. Preset: punchy. Thresh: -20. 9, soft knee: -1. 5, ratio: 2:0:1, attack: 7. 0 ms, release peak: 165 ms, release rms: 165 ms, makeup: 1. 5 db, output: 2. 0 db. That's it.

Hail comes inthis was a strange storm. Tons of lightning, but only distant thunder. The rain was nearly falling vertically. Audio description: may 20, 2014. Hail comes in and pounds a deck outside for about a minute or so, then fades and raindrops themselves take prominence. The wind picks up, so you can hear wind chimes going at it and some deep rolling thunder far in the background. If you’ve experienced high winds before, it will probably sound scary to you at volume. Recorded with a tascam dr-05 with a dead cat and no low cut. I got the mics as close to an open window as i could without being ridiculous. Cropped and faded in and out in audacity. No other modifications, so you’ll have to normalize it and equalize to your liking. Might be useful as a “heavy rain” sound, since the hail kind of sounds like that anyway.

This sounds as if it were staged by hollywood, but it actually did happen, i swear! birds chirp away to set the scene, but a beefy thunder roll intrudes. Soon after, raindrops begin to fall as if on cue. Theres a little handling noise click in the begining that is easy to crop out if you like. The recording is unedited. At 1:35 i move the mics closer to the deck so you can hear the splashing. At about at 3:10 i you’ll hear a different timbre as i move away from the rain and under an awning. About 3:45 the rain settles down and the birds start chirping again. Hopefully there are some useful segments in here. Recorded with a dead cat on a tascam dr-05 at 48khz 24 bit, then compressed with “lame --preset insane --scale 10” to make up for the low gain i used (i was afraid a thunderclap would engage the limiter). Cheers.

The sound of going on the bus, getting off and walking to entrance of a university. 0:01 - 0:15 - opening of bus doors and the beeping sound of the bus card. During the bus ride you will be able to hear the soundscape of inside the bus, the bus itself when stopping you could hear the sound of its brakes, you can also hear sound of vehicles coming from outside, there is also a low rumble sound in the bus and voices of people. 0:40 - the sound of the bus announcer telling the next destination in portuguese, cantonese and putonghua. 1:32 - bus door opens and people walking out and the sounds now is different in outside. On the way to university, you could hear vehicles, people talking, key chains, footsteps and the sound of the gates opening and closing. You will also hear at the someone pressing the button for the elevator. Key sounds: key chain, vehicles, people.

This recording is inspired by alienxxx http://freesound. Org/people/alienxxx/sounds/345510/made a little patch on my modular, still missing its (main) oscillators. I let the patch sound thru a pair of cheap computer speakers that i use as monitors. In an adjacent room, close to an open window, i put my phone and record. This is the unedited outcome. The recording was made 09:00 (16-05-11). Unfortunately nothing happened outside the window. Even the birds was quiet. I think there is a hint of feedback in the sound? first i planned to record with an old tape recorder, but i couldn’t find it. . . I think this recording should be listened to with low volume. May by it was a mistake to amplify the sound in audacity? but i think there is a nice room ambiance to the recording. Ideas for next time. Use guitar amp. Find old tape recorder. Don’t put recording device to close to window.

Made in ableton live this time, it is a multilayered loop consisting of recordings of an ak47, a 30 caliber 1918, and an m60 machine gun to make a rediculous powerful sound. A very short clicky kick drum with the high end reduced is added before the initial gunshot to make it punch more, otherwise it would sound weaker. There are two mechanical bolt sounds, one covering the upper mid range, and the other covering the extreme highs. Shell ejections and two reverb tails were mixed in at the end with some simple automated panning to make it move around the stereo field. The tempo slowly decreases to simulate barrel heating. Lots of processing. The layers were eq'ed, then ran into a software amp that is gently distorting the low and mid range. Then smashed together with ott multiband upward/downward compression to bring out the details. A maximizer was used to bring up the loudness some. Enjoy.

This is a collection of public domain sounds for easy transfer onto pocket operator po-33 sampler. (the po-33 splits one sound file into a kit of 16 sounds. Hence why a sample pack like this is appreciated). All sounds found here on freesound. Org under the cc0 / public domain licensing. Https://freesound. Org/people/bxyorna/sounds/410335/ round splashhttps://freesound. Org/people/14fpanska_nemec_petr/sounds/420227/ stone splashhttps://freesound. Org/people/hard3eat/sounds/387347/ 80s hathttps://freesound. Org/people/mafon2/sounds/371878/ water drip/drophttps://freesound. Org/people/mafon2/sounds/371270/ water drip/drophttps://freesound. Org/people/mafon2/sounds/371266/ water drip/drophttps://freesound. Org/people/tripjazz/sounds/506989/ tomshttps://freesound. Org/people/shpira/sounds/323606/ low tomhttps://freesound. Org/people/ainigmat/sounds/404841/ shaker. A bit of processing was done to normalize the sounds and adjust levels, i recommend downloading the original sounds if you're going to use them for none sampler projects. Hope you enjoy :).

It was time to mow the lawn, and it was a beautiful day for mowing. 80 degrees and sunny. Not much breeze at all. For the production: i took the zoom h1 out and set it by the porch about 2 feet up off the ground. Recorded at 96k 24bit. The low cut and agc were disabled. Once recorded, i finished it off with a small amount of airwindows "air" with the 22k tap opened all the way up. For the mower: i used a 21 inch 140 cc "550ex" series briggs & stratton gas walk behind push mower. When i finished mowing my yard, i approached the recorder up to about 2 feet, then i cut the engine. I start it again and let it idle in close proximity for about 8 seconds, still at a distance of about 2 feet, then cut the engine one last time. I'm sure this could potentially come in handy for those outdoor scenes where you could use some distant neighborhood activity or a close-up start/stop. Enjoy!.

Recording of parakeets being loud in springfield park in easy london at 7:30am in november. This was an unintentional recording as i was testing out some new gear, this meant that i wasn't able to unclip the mics from my rucksack straps and avoid picking up the rustle of my clothes and some breathing. A train and canal boat engines can be heard in the background. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

This sound was recorded via the use of a behringer b2 microphone, fostex fr2 and a home made parabolic reflector made from a tv satellite dish. The source of the sound was between 100m-200m away from the microphone. This has been eq'ed with high-end shelving to reduce gain noise, low-end shelved up to 1khz (to reduce wind and background noise) and the overall gain has been increased. The bird sound on the recording, is a bird called a "nightjar" which is a nocturnal bird. If you are interested in the build of the reflector itself, i have documented it here: https://www. Youtube. Com/watch?v=jyssecw1qf0. This sound is also available to listen to on my soundcloud: https://soundcloud. Com/jonmacmusicproduction. If you use my sound in any productions could you please put a link to my free sound, sound cloud or youtube channel so it can reach others!. Thanks for listening and downloading.

My original dw toms, mixed with themselves 1 octave up [the octave up is lowered -6db and the envelope reshaped to allow loud only the attack]. Then for that resulting mixdow again the same thing [so i used the same method two times]. At all steps i was using the simple compressor[not multiband] for not allowing overlimiting. For the two general mixdowns [because it was a double process] i used hard compressor at -0. 45 dbs. And for the two octavic parallel channels i used hard compressor -3. 60 dbsbecause the octave doesn't sound realistic if not well compressed. For all my dw octavic tomsed i used the same exact method. My original dw toms are here if you want to read data or mics. These toms do not sound realistic as stand alone sounds. These harmonics work better only in a complete mixdown, and have increased audibility than the original recordings [for silent music parts use the original because low velocity of parallel instruments will expose the supportive tom-harmonics].

Here it is! my first ever submission on freesound! i decided to start this all out with a bang, and post something really cool that i'm proud of making. I'm not sure exactly what this creature was supposed to be. I'll leave that up to your imaginations. How it was made:. Software: fl studio 20. Plugin(s): serum, valhallaroom, ott, fruity parametric eq 2, and fruity delay 2. This was made completely with synthesizers. I used serum for the main synth, made copies of it, and modified each of them to sound unique from the other. I'd try to explain how the synth was made, but there's a lot of stuff. To process it, i used ott to make it sound more powerful and clear, eq to get the frequencies and texture right, delay with a low pass filter to get that outdoors echo feel, and valhalla room for the reverb. I had fun making these. Enjoy!.

Just me stretching, rubbing and 'twanging' a rubber exercise band. Apologies for the knocking in the first 20 seconds, my upstairs neighbour started moving some furniture. I made this recording for a very specific purpose but i suppose it could be used in an animation or computer game but also for something bondage or kink related?. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

Electro-magnetic interference from the colorino talking color identifier and light probe when held near the internal ferrite antenna on the back right of a 13-year-old boombox near the bottom of the am broadcast band, from 530 to 580 khz. You first hear the device inactive being brought near the radio. This gives a low buzz of stacato clicks. At about 00:23 the light probe button is briefly pushed, you hear a quick boop of the light probe with low light level combined with the beginning of the white noise of the device active. If you put your ear near it after you use it, you will hear a slight hiss from the audio amplifier carrier idling for about a minute after last use. On the am radio this translates to white noise. At 00:26 there is a double click and a distorted voice says black. The voice is being picked up by the am radio. 10 seconds of white noise and i press the color button again and it says black. I put something else over the color sensor and it says a few more things. At 00:51 i hold down the light probe button and try to point it at the light above my desk while still holding it close enough to the radio to pick up the emi signal. You hear a warbling tone at 00:59 as the light reaching the sensor increases and decreases in brightness depending on how it's pointed. The signal fades in and out as the device is moved around. This has all happened at 530 khz. At 01:37 i step the radio up to 580 khz where you get a stronger signal. Wibw from topeka competes with the noise throughout the rest of the file. At 01:51 you hear the distorted error beep as i press the color button without anything but air and light in front of the color sensor. It must be pressed up against the thing you want the color of, or it gets in too much ambient light and errors out with a loud protesting beep.

Some cafe ambience severely altered with blok modular fx. Was originally a long jam cut up into a bunch of individual files but i figured searching through them would be a pain so i merged them back into one file. So listen through and pick the sounds you like with a wav editor, or enjoy it in its own regard as abstract sound sculpture or something. I don't want to divulge too much of what the patch looked like but it random note values with each keyboard press which were then ran through a waveshaper. Later on i add some reverb and use various things to alter the panning for some strange stereo effects. Edit: you might want to use a dc eliminator on the samples because the waveshaper creates some dc offset (basically useless low/zero frequency noise for those not in the know). But maybe it has some aesthetic value for you to keep it intact? you decide. Http://www. Meldaproduction. Com/plugins/product. Php?id=mutility this free vst has a dc eliminator included.

I've been recording some sounds for a an upcoming project which led me to recording the underside of the lid of a salad spinner and dangling a small plastic tab on it as it spun. It wasn't my intention but it sounds a bit like an old film projector. You can get some interesting results with this clip by messing a bit with the eq which is what i'll be doing for the finished project. This recording was made using a sound devices mixpre6ii and a stereo pair of fel em172 mics. Low cut on the sd which in basic mode is 80hz (i think). There is no processing to this recording other than to ‘normalize’ the levels. I do not require any credit or attribution. If any of these sounds have been of help, and you are feeling charitable, please do consider donating to freesound to help keep the site running (a link is also on the home page). Any donations are greatly appreciated!.

Here in the midwest we were treated to a nice preview of autumn here in the northern hemisphere. Both the temperature and humidity were nicely lower than usual and this soundscape was recorded featuring the beautiful northern breezes and a few of the birds that still live here. Since this ambience was recorded during the work-week, there are hardly any man-made internal combustion engine noises. Just the wind lifting and swirling through the tired forest and the blue jays, crows and insects. Recording made at 2:30pm on september 13 2022. Equipment used: recorder-sound devices 702microphones- left channel- sennheiser mkh 416right channel - sennheiser mkh 8070. The right channel, the very low-noise direction shotgun microphone, was pointed just about straight up at the leaves and branches of a huge cottonwood tree whose dry leaves were putting on a show. Hope you can hear this. Recorded and edited in stereo so either good studio monitors or headphones will make you feel you are in the forest surrounded by the gentle breezes swirling through oaks and cottonwood trees and insects and birds.

This recording is for people who hate the highlighted high frequencies. An old sabian aax small recorded with a røde m5 mic. I the created two copies of the original recording:1. On the first file i applied low pass at 2 khz and hard compression at -24 db without makeup gain. 2. On the second file i applied high pass at 2 khz and hard compression at -24 db without makeup gain. Then i lowered -2 db all the spectrum except for the band from 3. 5 khz to 9. 1 khz and i applied hard compression at -24 db without makeup gain. I merged the two files. The envelope was very flat due to the compression and thus i reshaped it on wavelab (process > level envelope. . . Or press the "v" keyboard button; draw a natural fade out in steps [non-linear]). The result is a warm crash for people who don't want them loud.

**warning**: do not play this sound with full volume on speakers with an amplifier; you risk damaging the driver through exertion. Format: wav - 24 bit, 44. 1khz [mono] - loopabledescription:a 30 second long pure sine wave of 14hz, at a constant spl level of -5 decibels. The audio file is loopable with a coherent crossing point from end to beginning. If you would like to read up on the infrasound phenomenon go here:http://goo. Gl/gmbsvm. Methodology:synthesis generation in sound forge pro macosx. -------------. This can be used for experimental purposes. I used infrasound in a horror film; attempting to create a physical sense of terror with the motion picture at specific times. It is believed by some that a high enough amplitude of infrasound can be used as a weapon. -------------. If you like or dislike this sound, please comment on your thoughts :). Reminder:this sound is licenced under cc0 [public domain] - so you are free to use and abuse it. I wouldn't mind a credit though if you're feeling generous. . .

Snippets from recordings of me playing the tanpura. Tuned to c sharp, the notes from top to bottom are g sharp, a sharp, c sharp, low c sharp. In traditional indian tuning the c sharp is the root note (first note in the scale) and referred to as sa. The fifth note (g sharp in this scale) is referred to as pa and the sixth note (a sharp) is dha. The pack contains recordings of the more traditional pa-sa-sa-sa type rythmns, as well as some experimenting with short bass lines, riffs and slap bass drones!. Before you say "a tanpura should not be played in such a way" please be comforted by the fact that this is not a traditional tanpura (and will never sound or be able to be played exactly like a traditional tanpura) it is part of the swar sangam, which combines the four drone strings of the tanpura with 15 harp strings. I am only playing the tanpura part in these recordings.

This is a sci-fi ambient drone sound i made. It's creative commons cc0, so please treat it as public domain. You can use it in any commercial or non-commercial media for free, no restrictions. For those curious how i made this, i took a quick 8-second drum loop from my pocket operator po-33 (ko) and ran it through a free time-stretching/pitch-shifting program called akaizer. The program's based on old samplers like the akai s1000 that had extremely artifact-heavy time-stretching and pitch-shifting features. If you slow a sound down enough, the final product tends to sound harsh and electric. Akaizer turned my 8-second drum loop into 2 minutes and 38 seconds of harsh, bassy noise, pretty damn close to the final. Then i imported the file (we'll call it file a) into reaper, my daw. Track 1 has reaeq with a high-shelf acting like a low-pass. Its curve is set at 1386. 2 hz, gain at -inf, and bandwidth at 2. In retrospect, i have no idea why i didn't use a low-pass. Track 1 has a send to a blank track 2, which has a fab-filter pro-q 3 high-pass filter with a 12db slope. It's at 320. 57hz, q is 1. 096. After the eq, track 2 has valhalla shimmer set to the black hole preset with no changes. Track 3 is the default file a with valhalla shimmer on the black hole setting, but with two tweaks. Low-cut is at 30hz, high-cut is at 6630hz. Everything else is the same. That's followed by fab-filter pro-q 3 with these eq settings:-0. 72db at 69. 463hz, q at 1. 007. -1. 11db at 536. 64hz, q at 1. 013, dynamic eq (click "make dynamic" and leave everything as-is). The point of this dynamic eq is to give a slight drop in gain in the 500hz region, which tends to get muddy in larger mixes. I wasn't sure if i'd use this for a larger project, and i didn't want build-up in that region from the already large-sounding track 1 and 2. The ocassional eq drops here also adds a warble to the final mix that helps sell an analog, electrical sound. +0. 85db at 3697. 3hz, q at 1. 009. This is to add subtle airiness to the drone. It seems weird to have "airiness" in the 3-4k region, but it's the sort of rumbliness of the sound traveling away and dissipating in the atmosphere after the lowest drone sounds. My volume fader settings for all 3 tracks:. Track 1: -8. 59 dbtrack 2: -6. 46 dbtrack 3: -6. 43 db. On my master bus, i have izotope imager 9 with these settings:. Band 1: width at -100 (mono) for 59hz and below. Band 2: nothing at 60hz to 525hz (width at 0). Band 3: width at 48. 1 for 526 to 1. 4khz. Band 4: width at 49. 4 at 1. 4khz and above. Stereoize is set to 6. 4ms on mode i. And that's it! no compressors or limiters anywhere, since i liked how dynamic the actual tracks were and i figure you can always add your own compressor or limiter to the final if you want. I've also added the original po-33 drum loop on my page, as well as the loop after it was run through akaizer but before it hit reaper in case you want to do your own processing. Enjoy :).

A was busy doing some big muff basedenvelope follower, envelope filteredcomposition, when it hit me, a small portioncould be used for the max. 12 second loopof a loop exercice we're doing in the class. Here, i manipulate the envelope filter twice. First, a recorded loop, of my vintage teisco60's 70's don't remember anymore, doesn't matterguitar, i found for 90 euro at an online rommelmarktlet's say. . . I put the envelope filter so that it 'just' triggerson the peaks of my audio file. . . Oww yeah !!!. The second time i trigger the envelope filter, is wheni play live on top of the recorded loop, i'm playing on purposepercussive, a coup of my hand with an immediate attack, toeven further more let the filter open & because of the amazinggrainy low-frequency based russian sovtek big muff the filtergrowls even more. . . On top of the just percussive behavior, i playof course an harmonic, content related sequence, feeling that the loopwhile being in an odd measure, already is repeating itself , the liveplaying, contrastwise, makes variation in texture & harmonic/melodice content. . . This is only a small portion of the biggercomposition, that's comin'curious ? head to. Https://jozefaleksanderpedro. Bandcamp. Com/. For support : paypal/jozefaleksanderpedro. Peace !04012021.

It's recording of a passenger train's on duty. You can hear the train's motors, the wheels rumbling against the rails, the wagon connectors hitting each other, when the train stops also people chatting. Near the end of the recording the room acoustics change, because a woman entered the area between wagons where i was standing with my recorded pointed down. I was standing in a narrow passage, where two wagons were joined, between two closed slide-doors. She have opened those so the overall sound has radically changed and i decided to end the recording. Through the entire recording the unit is moving forward, decelerating, stopping, staring and accelerating again repeatedly as it travels stopping at several stations. The recording was done with a hand-held zoom h2. Rear mics used pointed to the ground. I was in the loudest area in the whole train. I was using "low" gain (h2 has three mic gain levels to choose from: l/m/h). Viewed and converted to flac using audacity, the file hasn't been altered in any other way. Originally recorded as a 96khz/24-bit stereo wav file.

Here in the midwest we were treated to a nice preview of autumn here in the northern hemisphere. Both the temperature and humidity were nicely lower than usual and this soundscape was recorded featuring the beautiful northern breezes and a few of the birds that still live here. Since this ambience was recorded during the work-week, there are hardly any man-made internal combustion engine noises. Just the wind lifting and swirling through the tired forest and the blue jays, crows and insects. Recording made at 2:30pm on september 13 2022. Equipment used: recorder-sound devices 702microphones- left channel- sennheiser mkh 416right channel - sennheiser mkh 8070. The right channel, the very low-noise direction shotgun microphone, was pointed just about straight up at the leaves and branches of a huge cottonwood tree whose dry leaves were putting on a show. Hope you can hear this. Recorded and edited in stereo so either good studio monitors or headphones will make you feel you are in the forest surrounded by the gentle breezes swirling through oaks and cottonwood trees and insects and birds.

guardians of limbo (spectral voices, ethereal sounds, odd vocals) sample of fx preset from magnus choir vsti software. Virtual choir (musical instrument). Software description:. Magnus choir is a vst, vst3 and audio unit virtual instrument which can be used to create natural and synthetic choirs. The male and female choruses combine to form a mixed choir, featuring the classic satb (soprano, alto, tenor, bass) structure: women sing soprano and alto, while men sing tenor and bass. Versatile to generate a wide spectrum of choirs, vocal textures, choral pads and voices with modulation capabilities for a new level of realism in digital sound creation. • 54 preset sounds ready to use, including a vast array of natural and synthetic sounds, from oohs, aahs, men and women in mixed choirs to the celestial choir of angels, reso pads, dark atmos, creepy voices, ambient ghostly and birdsong effects, as well as cinematic and soundscapes. 01. - abbey ghost02. - ad infinitum formant03. - ad libitum chorale04. - aeternus lux lucis05. - alchemical signals06. - angelic vox07. - angels between us08. - apocalyptic chamber09. - astral singers10. - aurum vox pad11. - birds sonic sweep12. - caelestis kingdom13. - celestial choir14. - choral ensemble15. - choralis pad16. - cinematic padilius17. - cosmic odyssey voice18. - cryogenic dimension19. - dark cantus20. - digital voice21. - dystopian chorus22. - elves land23. - enchanted goblins24. - ethereal voices25. - guardians of limbo26. - lost souls in the dark27. - male & female aahs28. - morph dreams29. - morphed vowels30. - mystical vowels31. - nebula dark atmos32. - necromancer summons33. - neo choir34. - octave aahs choir35. - octave vox pad36. - oniric sequences37. - oohs choir38. - psychedelic vox39. - psychomanteum reso40. - quasi spatial voices41. - relaxing paradise42. - restless spirits43. - sanctus holy chant44. - sonorous skies45. - sopranvox c4-c646. - spatiotemporal atmos47. - spectral hell48. - synthetic chorus49. - synthesized vocals50. - underworld embryos51. - vinyl chorus52. - voices in the mist53. - vowelled soundscape54. - vox vocis texture. • low frequency oscillator section: these knobs apply modulation to the selected instrument. By using the lfo to modulate various aspects of the audio signal, you can apply effects such as vibrato or tremolo. • adsr envelope generator with attack, sustain, decay and release parameters. • pitch bend: the pitch bend knob directly changes the pitch of the selected instrument. • reverb built-in: provides a spaciousness and depth to simulate the sound reflections from walls, floors and ceilings following a sound created in an acoustically reflective environment. Small rooms can be modeled as well as large spaces. • filter section: with filter type box for low pass filter and high pass filter. • amplitude range parameters: it controls the loudness, the way in which we perceive amplitude. The sensitivity level is set by the user. • panning potentiometer control. • midi cc automation: implementation of midi continuous controller parameters for use with external hardware control via daw.

Clean recording of various sounds that would occur when maneuvering around an office space (specifically a desk) and manipulating common office objects. Recording features lots of paper rustling and sliding across a wooden desk, handling pens and a stapler, stuffing manila folders and plastic binders, and towards the end there are some sounds of small-medium sized personal bag being unzipped and zipped and then being filled with some of the office materials. Should work great for filling in general office noises in a scene or reinforcing actions that involve any of the materials featured in the recording. There should be enough variety to allow you to glean more isolated sounds or just use assortments of layered sounds. Recorded with an akg p170 into a tascam 208i audio interface at 48khz/24-bit. Microphone was positioned roughly 1. 5 - 2 feet away from the source. There is some slight room reverb present, which is intentional, and should match common office workspaces well. An 85hz high-pass filter was applied to remove any unintentional, unnatural low-frequency rumbling that may have been picked up during recording.

Studio technologies - stereo simulator (generation ii). Https://studio-tech. Com/products/generation-ii-stereo-simulator/. The generation ii stereo simulator from studio technologies creates a convincing stereo imagefrom a mono audio source. The fully mono-compatible signal simulates space withoutreverberation by using random, non-recursive filter techniques. The mode switch (found on the hardware unit) controls the overall sound of the generation ii. In the music position, the full audio bandwidth of the input signal is simulated. This mode isappropriate for audio material with little or no voice-only content. In the music & voice position, the input signal is sent through a band-reject filter prior togetting sent to the simulator circuits. This creates stereo simulation over the low and highfrequency range, while limiting simulation in the voice band. This mode is appropriate for audiomaterial that contains voice-only content, such as a film track or television show. The stereo intensity control determines the amount of stereo simulation that is produced. Inthe fully counterclockwise position (ir files “0” – included for process comparison), no simulatedstereo is produced. The mono input signal is sent equally to the left and right outputs. As thecontrol is turned clockwise (ir files “1 – 6”), the amount of stereo simulation increases.